E1 configuration issues

Answered Question
Jan 13th, 2008
User Badges:

We are getting 8 mb of bandwidth through 4 e1s from a service provider. They have given us the following information


x.x.x.x My end IP address

x.x.x.x other end IP address

x.x.x.x Network address


x.x.x.x My end IP address

x.x.x.x other end IP address

x.x.x.x Network address


x.x.x.x My end IP address

x.x.x.x other end IP address

x.x.x.x Network address


x.x.x.x My end IP address

x.x.x.x other end IP address

x.x.x.x Network address


They told me to assign the above IPs to your E1 interface (Virtual Serial interface). I don't know how to configure the E1 cards and how to assign the above IP addresses. Please help me in this issue that how can I make the required configurations.


Correct Answer by paolo bevilacqua about 9 years 2 months ago

Sure, glad it helped.


Please rate useful posts using the scrollbox below!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
paolo bevilacqua Mon, 01/14/2008 - 10:37
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

controller E1 x/y

channel-group timeslots 1-31




interface x/y:0

ip address ...




ip route 0.0.0.0 0.0.0.0



Hope this helps, please rate post if it does!

m_aurangzeb Mon, 01/14/2008 - 21:11
User Badges:

Thanks p.bevilacqua dear it worked. :) I HAVE TO ASK ANOTHER QUESTION BUT I WILL ASK THIS IN THE NEXT POST.

Correct Answer
paolo bevilacqua Tue, 01/15/2008 - 01:50
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Sure, glad it helped.


Please rate useful posts using the scrollbox below!

Actions

This Discussion