cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
331
Views
0
Helpful
3
Replies

E1 configuration issues

m_aurangzeb
Level 1
Level 1

We are getting 8 mb of bandwidth through 4 e1s from a service provider. They have given us the following information

x.x.x.x My end IP address

x.x.x.x other end IP address

x.x.x.x Network address

x.x.x.x My end IP address

x.x.x.x other end IP address

x.x.x.x Network address

x.x.x.x My end IP address

x.x.x.x other end IP address

x.x.x.x Network address

x.x.x.x My end IP address

x.x.x.x other end IP address

x.x.x.x Network address

They told me to assign the above IPs to your E1 interface (Virtual Serial interface). I don't know how to configure the E1 cards and how to assign the above IP addresses. Please help me in this issue that how can I make the required configurations.

1 Accepted Solution

Accepted Solutions

Sure, glad it helped.

Please rate useful posts using the scrollbox below!

View solution in original post

3 Replies 3

paolo bevilacqua
Hall of Fame
Hall of Fame

controller E1 x/y

channel-group timeslots 1-31

interface x/y:0

ip address ...

ip route 0.0.0.0 0.0.0.0

Hope this helps, please rate post if it does!

Thanks p.bevilacqua dear it worked. :) I HAVE TO ASK ANOTHER QUESTION BUT I WILL ASK THIS IN THE NEXT POST.

Sure, glad it helped.

Please rate useful posts using the scrollbox below!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: