Routing and VPN for HSEC 1841 router

Unanswered Question

Hi,

I got a 1841 router with 2 ethernet port and HSEC IOS.I have terminating broadband connection in bridge mode and got the public ip for myself (i.e 122.16.81.X/24).

Requirement:

1.Want to allow my internal network 192.168.1.0/24 to go out the internet.

2. Would like to create site to site VPN with remote office(public IP 59.162.65.X/29 and private IP 192.168.16.0/24).

Anyone can guide on Nat,Access list and rest of the IKE and IPSEC parameters will be highly appriciated.


Reg,

Sushil


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
royalblues Mon, 01/14/2008 - 03:32
User Badges:
  • Green, 3000 points or more



access-list 100 permit ip 192.168.1.0 0.0.0.255 any


ip nat pool test source list 100 interface overload


interface

ip nat inside


interface

ip nat outside


If you want to be more specific, you can tweak the access-list to allow only WWW traffic.


For site to site VPN, take a look here


http://www.cisco.com/en/US/products/ps9403/products_configuration_example09186a00800b4b40.shtml


http://www.cisco.com/en/US/products/ps9403/prod_configuration_examples_list.html


HTH

Narayan



Actions

This Discussion