01-14-2008 07:31 AM - edited 03-17-2019 09:14 PM
1841 allows voip in pass-through mode.
What software version do you i need to implement this?
Solved! Go to Solution.
01-14-2008 08:59 AM
According to Feature Navigator, you will need 12.3(8)YG or later with one of the following feature sets:
Advanced Enterprise Services
Advanced IP Services
Enterprise Services
SP Services
Hope this helps. If so, please rate the post.
Brandon
01-14-2008 08:59 AM
According to Feature Navigator, you will need 12.3(8)YG or later with one of the following feature sets:
Advanced Enterprise Services
Advanced IP Services
Enterprise Services
SP Services
Hope this helps. If so, please rate the post.
Brandon
01-14-2008 09:06 AM
Thx.
How do you got to that conclusion?
01-14-2008 09:38 AM
By following these steps:
1. Go to Feature Navigator (www.cisco.com/go/fn)
2. Choose Search by Feature
3. Search for VoIP
4. Choose the feature Voice Over IP (VoIP) and click Add
5. Click Continue
6. For Platform, choose 1841
You will see that the dropdowns for Release and Feature Set only contain the entries listed in my previous post.
Hope this helps. If so, please rate the post.
Brandon
01-14-2008 10:25 AM
Wait a minute Brandon :)
One has to define first what is meant "voip in pass-through mode".
If is what it think, that is routing and applying QoS/marking/NAT or whatever to voice packets, I think any image would do that.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide