cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
422
Views
5
Helpful
3
Replies

WAAS WCCP Interception

cfolkerts
Level 1
Level 1

Is there any performance issues with redirecting wccp 62 on an SVI of the 6500 series switch? The WAN interfaces are not layer 3 but are associated with a vlan that has an SVI configured. I will be using redirect lists for interception.

Regards,

1 Accepted Solution

Accepted Solutions

Depends on the IP addresses being intercepted. The default mask is typically fine for a /23 or /24 address range.

Zach

View solution in original post

3 Replies 3

Zach Seils
Level 7
Level 7

Clifton,

On the 6500 platform, you need to follow these recommendations to ensure WCCP redirection happens completely in hardware:

- L2 Forwarding (configured on WAE)

- Mask Assignment (configured on WAE)

- Inbound redirection (configured on 6500)

- No 'ip wccp redirect exclude in' configured (on 6500)

Zach

Thanks Zach for the info. One more question.

For mask assignment, shall I use the default settings or should I edit the mask? I have two Core WAEs.

Regards

Depends on the IP addresses being intercepted. The default mask is typically fine for a /23 or /24 address range.

Zach

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: