01-14-2008 11:31 AM - edited 03-05-2019 08:28 PM
I see verfy high cpu utilization on my 4507 switch
The sh proc cpu shows the catmgmt -lo priority process with high utilization
the show platform health shows high utilization for the KxAclPathMan create/ process
after reading the troubleshooting guide it points to see whether there are any interface flaps but i do not see any
Any inputs will help
SUPV
IOS - 12.1 20 EW2
Ambi
Solved! Go to Solution.
01-22-2008 04:05 AM
Have you enabled looging even link-status under your interfaces?
4500 does not show any interface flaps if the above command has been configured
HTH
Narayan
01-14-2008 04:10 PM
Maybe this can point you in the correct direction . If not check the bug toolkit.
http://www.cisco.com/en/US/products/hw/switches/ps663/products_tech_note09186a00804cef15.shtml
01-22-2008 04:05 AM
Have you enabled looging even link-status under your interfaces?
4500 does not show any interface flaps if the above command has been configured
HTH
Narayan
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: