01-15-2008 06:58 AM
i have 3560 device on remote site and due to some wrong configuration tacac communication is getting failed and switch is now directly asking for password however it gives authorization failed when i put in.
is there any way by which i can fetch the config via snmp and change configuration and reconfigure the switch.
i tried using cwconfig features but getting authentication failed error is popping up.
Solved! Go to Solution.
01-15-2008 07:38 AM
You can use any snmp utlity...you would just query / set the same snmp OID's
01-15-2008 07:14 AM
This explains how to do it:
http://www.cisco.com/en/US/tech/tk648/tk362/technologies_configuration_example09186a0080094aa6.shtml
01-15-2008 07:25 AM
Hi davistan,
this require hpopenview and solaris. i dont have any of them, is this still possible ?
01-15-2008 07:38 AM
You can use any snmp utlity...you would just query / set the same snmp OID's
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide