I'm experiencing poor voice quality between my home office and a remote. The offices are connected via a dedicated T-1. The home office is using a 3745 and the remote is running a 3725. QOS is setup as follows:
class-map match-all termserv
match access-group 103
class-map match-all video
match access-group 112
class-map match-all voice
match ip precedence 5
This map is applied to the serial interfaces on the routers.
Output of show policy-map:
Policy Map wan-outbound
Bandwidth 350 (kbps) Burst 8750 (Bytes)
Bandwidth 375 (kbps) Max Threshold 64 (packets)
Bandwidth 256 (kbps) Max Threshold 64 (packets)
AutoQos is enabled on the 3550 switches on both ends. Not sure where to start.