FWSM IOS 3.1.8 and higher (issue or my mistake?)

Calin C. · ‎01-15-2008

Hello everyone!

I have a C6500 (SUP720+FWSM(IOS 3.1.5)).

Between the SUP and FWSM I have configured interface VLAN50 and enable OSPF on this interface subnet.Everything is working well.Then I upgrade first to 3.1.8 and then to 3.2.4 , with the same configuration on SUP and FWSM and the OSPF process does not get UP.On the SUP debug, I see that it send hello packets to FWSM, no reply.From FWSM I get at debug: "OSPF: Input packet ignored.".L3 connection exist between FWSM and SUP (I can ping each other).The access-list are unmodified, like in 3.1.5, so traffic is allowed.

I believe that I have some mistake.

Can you help me with an advice?

Thank you!

Best regards,

Calin

vkapoor5 · ‎01-22-2008

When you log in to the FWSM during normal operation, you can copy the application software to the current application partition from a TFTP, FTP, HTTP, or HTTPS server.

http://www.cisco.com/en/US/docs/security/fwsm/fwsm31/upgrade/guide/fwsm31up.html#wp2070189