ASDM 6 bugs

Unanswered Question
Jan 15th, 2008

Upgraded ASA to 8 with ASDM 6 and noticed the following oddities in the new ASDM.

Configuration -> Remote Access VPN -> IPSec Connection Profiles -> Enable interfaces for IPsec access. The checkbox for outside is not checked even though it is enabled.

Configuration -> Site to Site VPN -> Connection Profiles. Only 1 of my tunnel groups is showing up in the list even though there are 3 in the config.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
acomiskey Wed, 01/16/2008 - 06:53

Found another one...

Configuration -> Site to Site VPN -> Connection Profiles. The 1 tunnel group which is showing up says IPsec protocol is Disabled. This is not true.

Anyone else see these issues after going to 8?

acomiskey Thu, 01/17/2008 - 11:44

...and another one...

Monitoring -> VPN Statistics -> Sessions -> Bytes TX/RX

The byte counter used to add all of the ipsec sessions together, now it seems to just pick one. For example, if I have multiple interesting traffic acl's defined for a site to site tunnel, ASDM 5 would add all the traffic together. ASDM 6 just seems to pick one of the acl's.

I want ASDM 5 back!


This Discussion