01-15-2008 12:35 PM - edited 07-03-2021 03:12 PM
I have two 2006 series WLC's and 5 ap's on both. I have a WLAN for public use that has only web authentication for security. (This WLAN has internet only, nothing else. Its used for testing.) When users authenticate, everything works for about an hour, then they drop and it takes 10-15 minutes to come back up. Then their good for about another hour.
WHAT IVE DONE:
--There is no QoS running on the the open WLAN
--Changed the client roaming profile:
Minimum RSSI -- -85
Hysteresis -- 4
Scan Threshold -- -72
Transition Time -- 1
Is there anything you guys can help me with? Thanks in advance!
01-15-2008 02:15 PM
If the infrastructure is not the issue, try changeing the value on the idle timeout (located on the Controller | General tab) or the session timeout on the WLAN SSID.
01-15-2008 02:39 PM
What should I change these values to?
01-15-2008 03:28 PM
Try setting it to 28800. That would be 8 hours.
01-15-2008 03:38 PM
what code are you running.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: