01-15-2008 02:39 PM - edited 03-09-2019 07:53 PM
Hi Guys,
I have been asked to create a tunnel between 2 end points but the customer does not want anything public. Here are the details.
First peer: an ASA
Inside = 10.60.60.0/24
Public = 69.69.69.10
Second Peer: an 871 router
Inside = 10.200.10.0/24
Public = 79.79.79.10
End result should be that the 10.200.10.0 network does not need access to the internet; this network only needs to reach the 10.60.60.0 network via the tunnel
How do I get this done?
01-15-2008 04:47 PM
access-list inside permit ip 10.200.10.0/24 10.60.60.0/24 log
access-list inside deny ip any any log
access-group inside in interface inside
CCIE security
01-15-2008 05:05 PM
I beleive this will be done at the ASA right?
what about at the IOS router?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide