royalblues Wed, 01/16/2008 - 00:38

The 7200 series port adapters connect to the two PCI buses based on the postion of the slot (left or right)


7206 VXR is limited to 600 BW points on each bus. The STM card takes about 300 which limits the number of ports to 2 on each side of the chassis


Have a look at this link

http://www.cisco.com/en/US/products/hw/modules/ps2033/products_configuration_guide_chapter09186a008014cf5c.html#wp1061412


HTH

Narayan



Actions

This Discussion