×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

CME 4.0 and analog phones

Unanswered Question

I am using CME 4.1 on a 2811 router which has a 2 port FXS card


We need to install 2 analog phones and want them to communicate with the IP phones registered to the CME


Can anyone let me know the configuration required on the CME or point me to a link.


Heres my CME config


voice-port 0/2/0

station-id number 17000

!

voice-port 0/2/1


telephony-service

load 7910 P00405000700

load 7960-7940 P0030702T023

max-ephones 10

max-dn 10

ip source-address 10.100.192.1 port 2000

max-redirect 10

auto assign 1 to 10

time-format 24

date-format dd-mm-yy

voicemail 8000

max-conferences 8 gain -6

moh music-on-hold.au

web admin system name sysadmin secret 5 $1$vDUJ$FVNdefC0fN5RtegC5x1Qi1

dn-webedit

time-webedit

transfer-system full-consult

create cnf-files version-stamp 7960 Oct 04 2007 14:35:56

!

!

ephone-dn 1 dual-line

number 15001

label Test1

name Test1

call-forward busy 8000

call-forward noan 8000 timeout 10

!

!

ephone-dn 2 dual-line

number 15002

label Test2

name Test2

call-forward busy 8000

call-forward noan 8000 timeout 10

!

!


ephone-dn 9

number 8000.....

mwi on

!

!

ephone-dn 10

number 8001.....

mwi off

!

!

ephone 1

no multicast-moh

mac-address 0014.6A87.99CE

type 7940

button 1:2

!

!

!

ephone 2

no multicast-moh

mac-address 0013.C3D6.5E20

type 7940

button 1:1

!


Ambi

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
paolo bevilacqua Wed, 01/16/2008 - 04:59
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Hi,


the simpler way, is to configure dial-peer pots with destination-pattern the number you want, and the port.

Else you can have the phone to be seen like ephones, this requires "sccp mode for fxs":

http://cisco.com/en/US/products/ps6441/products_feature_guide09186a0080483a76.html


Hope this helps, please rate post if it does!

Actions

This Discussion