VPN tunnel disconnect when new tunnel is added

Unanswered Question
Jan 16th, 2008
User Badges:

users complain they are unable to telnet to desired devices in the private network when I add a new ipsec vpn tunnel. CSCdz46552 seems to address my issue. I'm currently running 1700-k9o3sy7-mz.122-8.t10 on a 1721 router w/8/32mg of mem. Any suggestions on the IOS to upgrade to ???? Thank You.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Richard Burts Wed, 01/16/2008 - 08:10
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN


I was looking recently and I was not able to find a crypto image for the 1721 that would run in 8/32 of memory. Part of the issue is that most of the 12.2T images are no longer available from CCO (they have been removed). Without a memory upgrade or a different platform I am not sure that there is an option to solve your problem.

If you do find a solution I hope that you will post it back to the forum.




This Discussion