01-16-2008 03:10 PM - edited 03-05-2019 08:31 PM
Hi all,
What are the steps to span multiple ports on a swith? We are in the process on installing a sniffer on the LAN and this requires spanning ports on the switch.
Your help is greately appreciated,
SK
01-16-2008 06:28 PM
Catalyst 6500 ?
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SXF/native/configuration/guide/span.html
HTH,
__
Edison.
01-16-2008 06:43 PM
These links should provide you with plenty information for your requirements
http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a008015c612.shtml
For catos
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/catos/8.x/configuration/guide/span.html#wp1020120
Rgds
Jorge
01-17-2008 08:27 AM
Thanks to all!
Very much appreciated,
sK
01-18-2008 09:11 PM
u need config span port on your switch
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Log in to Community
