01-16-2008 10:39 PM - edited 03-05-2019 08:31 PM
I have a 1700 series router. Pls refer the attached show version output.
Does this router supports
1. Frame Relay
2. Policy Routing
3. Multiple HSRP groups?
Thanks
01-16-2008 10:46 PM
Hi Avinash,
Yes the version of IOS you are using supports Frame relay, policy routing as well as HSRP.
Also you can use Feature Navigator for future use
http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp
Just click on serach by platform and then select your router model from drop down and the image which you are running and it will give you all features supported by that router in that particular feature set.
HTH
Ankur
*Pls rate all helpfull post
01-16-2008 11:17 PM
Thank You. I only have 2 Ethernet interfaces and one B-ISDN interface on this router. Where can I connect this frame relay circuit? Sorry, I have no experience on frame relay.
01-16-2008 11:25 PM
Hi Avinash,
AFAIK this is a moduar router and you need a specific interface type which can support farme relay encapsulation. I believe you need Synchronous serial interfaces on serial WAN interface cards.
Have a look a this link which is 1750 data sheet
http://www.cisco.com/en/US/products/hw/routers/ps221/products_data_sheet09186a0080092102.html
HTH
Ankur
01-16-2008 10:48 PM
hi
for IOS reffer this link :
http://www.cisco.com/en/US/products/sw/iosswrel/ps5187/tsd_products_support_series_home.html
for router reffer this link :
http://www.cisco.com/en/US/products/hw/routers/ps221/tsd_products_support_series_home.html
HTH,
regards,
shri :)
02-07-2008 09:16 PM
My ISP has given me the serial interface IP's along with DLCI. I have only 2 ethernet ports on the router, one for LAN and another for WAN side. I cannot configure Frame Relay. What is the specification of the WAN Serail Interface for the router which I need to buy?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: