CSM - TCL script to show concurrent health checks

Unanswered Question
Jan 18th, 2008
User Badges:

CSM's have a limitation where the control processor can only manage 200 current health checks at one time. This problem arises if you have a number of serverfarms and a probe with short intervals like 2 seconds, if the 200 limit is reached which has happened, the health checking can be delayed to say 40-60 seconds instead of 2 seconds configured, because the 200 limit has been reached the control processor is unable to cope.


Question: I would like to run a TCL script for say 24 hours. Running command (sh mod csm x tech probe) say every 30 seconds to see the “low and high” open sockets in system during this period. I'm new TCL any ideas?


'Open Sockets in System' below : 180 / 240 - shows you are using 180 concurrent TCP health checks out of 200 available (not 240), confirmed this with Cisco


sh mod csm 3 tech probe

Software version: 4.2(6)


--------------------------------------------------------------

------------------ Health Monitor Statistics -----------------

--------------------------------------------------------------

Probe templates: 9

Suspects created: 1257

Open Sockets in System : 180 / 240

Active Suspect(no ICMP): 10 / 200

Active Script Suspect : 0 / 50

Num events : 1257


ICMP suspects: 20

Healthy suspects: 20

Failures suspected: 0

Failures confirmed: 0


TCP suspects: 1233

Healthy suspects: 1094

Failures suspected: 0

Failures confirmed: 139


HTTP suspects: 4

Healthy suspects: 2

Failures suspected: 2

Failures confirmed: 0



Probe attempts: 1199350153 +14976231

Total recoveries: 1681206 +481

Total failures: 93768 +110

Total Pending: 0 +0



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion