01-18-2008 07:04 AM - edited 03-10-2019 03:36 PM
Hi,
I've impelemented the PEAP authentication successfully.
when trying to connect to the network,the station prompt for the username and password just for the first connection,and then it stores that username/password in the registry base.
can I do somthing to make it prompts in each connection?
thanks
01-18-2008 08:44 AM
Here is the link to remove cached username during peap authentication from windows.
http://support.microsoft.com/kb/823731/
This is a windows feature for peap
Regards,
~JG
Do rate helpful posts
01-21-2008 07:39 AM
I've delete the registre entry for EAPoL,But each time connected it re-enable it.
is there another solution that permit to prompt for Login/password for each connection.?
thanks
01-21-2008 02:08 PM
Do you have the "Enable Fast Reconnect" disabled in the Global Authentication Setup?
01-22-2008 06:25 AM
it is disabled
01-22-2008 06:55 AM
FYI.
I am having the same exact issue as ismail884.
However, I am using steelbelted/juniper
radius for PEAP authentication instead of Cisco
ACS. I also have "enable FAST-PEAP" disabled
in steelbelted radius but somehow the credential
still cache on the windows client.
01-22-2008 06:56 AM
steelbelted radius version I am using is
6.x.
CCIE Security
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: