1760 - vic2-2BRI-/TE - vic-2FXO

Unanswered Question
Jan 19th, 2008
User Badges:

Router 1760 ccme 4.1

IOS c1700-adventerprisek9-mz.124-15.T1.bin

slot0 WIC-1ADSL-I-DG

slot1 empty

slot2 vic2-2BRI-/TE

slot3 vic-2FXO


Hello, I am facing the following problem:

When I plug-in the vic-2FXO card I am unable to see (and configute) voice ports 2/0 & 2/1

I will appreciate any help.




Attachment: 
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4.3 (4 ratings)
Loading.
paolo bevilacqua Sat, 01/19/2008 - 03:12
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Hi, send show diag. Most likely you do not have dsp resource and need to add the in the form of PVDM-256-XX modules.


Hope this helps, please rate post if it does!

pcameron Sat, 01/19/2008 - 03:12
User Badges:
  • Cisco Employee,

Do a SH DIAG and check the type of DSP module you have installed in the router. I suspect you don't have enough DSP resources for the 4 B channels on the 2 port BRI and the 2 port FXO ports.


Paste the SH DIAG output here so we can confirm.





thotsaphon Sat, 01/19/2008 - 03:57
User Badges:
  • Gold, 750 points or more

Hi all.

Seems you guys replied at the same time and made more sense to me as well.


Cheers ;-)

Thot.

pcameron Sat, 01/19/2008 - 04:16
User Badges:
  • Cisco Employee,

So now a race to give you the final answer :-)


You have a PVDM-256K-4= DSP module , which will only support 4 channels, which would be the 4 B channels of the BRI card, or the VIC-2FXO, but not both at the same time.


You will need a PVDM-256K-8= at the very least for this to work.


To understand DSP and hardware requirements , check out the DSP calculator on cisco.com -


http://www.cisco.com/pcgi-bin/Support/DSP/cisco_prodsel.pl





Actions

This Discussion