01-19-2008 04:31 AM - edited 03-10-2019 03:36 PM
Hi
I have the following problem:
- We have a WLC Version 4.2.61.0
-- We have a SSID wep-cloud
-- We have a SSID wpa-cloud
- We have an ACS Version 3.2
Now I would like to authenticate the SSID wep-cloud with LEAP on the ACS. At the same time, I would like to authenticate the SSID wpa-cloud with PEAP on the same ACS.
Is it somehow possible to use multiple eap types for one device (WLC) on the ACS.
If i configure the WLC under Network Configuration, I can set the Authenticate Using field "RADIUS (Cisco Aironet)" for LEAP or "RADIUS (Cisco IOS/PIX)" for PEAP.
Thanks in advance for your help.
Solved! Go to Solution.
01-24-2008 11:39 AM
It is not possible to use multiple eap types for a single device on the ACS. Following links may help you
01-24-2008 11:39 AM
It is not possible to use multiple eap types for a single device on the ACS. Following links may help you
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: