paolo bevilacqua Sat, 01/19/2008 - 05:14
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Do you realize that your question is akin to asking how long is a piece of string ?


Please be professional and explain full details of a problem when posting in this forum.

ravi.gyala Sat, 01/19/2008 - 05:24
User Badges:

m trying to say how many causes behind the slow speed of network?

paolo bevilacqua Sat, 01/19/2008 - 05:27
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Very many.

Now if you have a real problem, please explain it.

If you are preparing for some exam or just an idle question, state it and you can be pointed to some generic training material.

ravi.gyala Sat, 01/19/2008 - 05:33
User Badges:

well

it's a real problem. our client site we are using Cisco 1841 router and server site Dlink 3660 router. but problem is in client site.

when we want to save data into server it trasmite very slowly. it's showing data transmission success rate is 72%.

paolo bevilacqua Sat, 01/19/2008 - 05:57
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

That is a start. From the 1841 router do "ping x.x.x.x repeat 1000" with x.x.x.x being the address of server.

If you have some packets lost, problem can be on the circuits, and you start investigating that.


ravi.gyala Sat, 01/19/2008 - 06:10
User Badges:

i have already do this . there are some packets are lost. i m not understand where is the problem . i m thinking our client did not set any proper earthing wires on site there may be chaces for packet lost.is it?

paolo bevilacqua Sat, 01/19/2008 - 06:36
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

How many packets lost? is there a circuit and of which kind? Check show interface for any error.

shiva_ial Mon, 01/21/2008 - 04:24
User Badges:



first thing you have to verify is

duplex settings on both ends

it should be the same

if one side is set as half duplex and other as full you may experience some slow response issues




ravi.gyala Mon, 01/21/2008 - 04:35
User Badges:

i have already check this . both ends are same .....pls tell me another possiblities..

smothuku Mon, 01/21/2008 - 04:42
User Badges:
  • Silver, 250 points or more

Hi Ravi ,


how the client site is connected to server site ? any E1 or any other line ?


if you are using any circuit check the input errors ..


Thanks,

satish.

ravi.gyala Mon, 01/21/2008 - 05:20
User Badges:

client site connected to server site by using ISDN line.

shiva_ial Mon, 01/21/2008 - 04:48
User Badges:

if the traffic passes through the serial link

or any check the utilization of the link




shiva_ial Mon, 01/21/2008 - 04:50
User Badges:

if the traffic passes through the serial link

or any check the utilization of the link


your question is more generic thats why delay

you post with more specific details so someone in this forum or myself can help to solve the problem.


rgds

shiva




ravi.gyala Mon, 01/21/2008 - 05:36
User Badges:

well

it's a real problem. our client site we are using Cisco 1841 router and server site Dlink 3660 router. but problem is in client site.

when we want to save data into server it trasmite very slowly. it's showing data transmission success rate is 72%.




ravi.gyala Mon, 01/21/2008 - 05:59
User Badges:

there is no need to increase the bandwitdh, bco'z there is very lees data is to be trasferred. can u tell me there is chances of data loss is no proper earthing. is it?

paolo bevilacqua Mon, 01/21/2008 - 06:15
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Until you explain what are the circuits in question, and send show interface, nothing can be suggested.


Please don't submit questions to this professional forum unless you are ready to corroborate you inquiry with all the necessary details.

Actions

This Discussion