01-19-2008 06:45 AM
HI
im trying to install a fresh CCME
but when im trying to extract both CCME and GUI files im getting this error.
CCME# archive tar /xtract tftp://192.168.13.26/cme-gui-4.1.0.1.tar flash:
%Error, "tftp://192.168.13.26/cme-gui-4.1.0.1.tar" is a directory.
i tried formatting flash and all things.
still im not able to install
please reply
Many Thanks
Manoj
01-19-2008 07:05 AM
yes, it is a know bug.
Try
ftp://
If still problems, upgrade IOS image.
hope this helps, please rate post if it does!
01-21-2008 05:42 PM
This is not a bug, you are using an invalid syntax:
Try 'archive tar /x tftp://192.168.13.26//cme-gui-4.1.0.1.tar flash:'
Note the double forward slash '//' after the ip.
This is clearly documented.
01-22-2008 04:25 AM
It's definately a bug - CSCek63178
Symptom:
When extracting a .tar file via the command line from a tftp or ftp server
the following error may occur:
Router#archive tar /xtract ftp://X.X.X.X/XXXX.tar flash:
%Error, "ftp://X.X.X.X/XXXX.tar" is a directory.
Conditions:
This problem is seen when executing the command:
archive tar /xtract
With the source file coming from an ftp or tftp server will result in an
error message indicating that the source file is a directory.
Workaround:
There is no known workaround.
Fix is in 12.4.13e, 12.4(11)XJ, 12.4.15T
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: