01-20-2008 07:25 PM - edited 03-03-2019 08:20 PM
Guys we have three methods to filter routes in BGP(correct me if i m wrong) first one is distibute list second is route maps and third is prefix-list.....what is the diference between them
01-20-2008 07:58 PM
U can use filter-list(eg: for as-path access-list) also along with the above three..
U will get more details over here..
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/hirp_r/
01-20-2008 11:33 PM
All of them more or less achieves the same thing except for route-maps which gives you more felxibility and can reference a prefix-list, access-list etc and also set attributes
HTH
Narayan
01-21-2008 02:34 AM
Every method filters using it's own technique. What is important is their sequence, which is reversed for outbound and inbound updates.
On Inbound:
1. Prefix List
2. Filter List
3. Route Map
4. Distribute List
On Outbound:
1. Distribute list
2. Route Map
3. Filter list
4. Prefix List
From the other routing process inside the router:
1. Filter List
2. Distribute List
3. Default Weight
4. Filter-list weight
5. Route maps
Hope this helps.
Please rate all helpful posts.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: