pix 501 confige but not working

Unanswered Question
Jan 20th, 2008

I have bsnl router

pix outside 192.168.1.101 255.255.255.0

inside 192.168.10.1 255.255.255.0

lan network ip address range 192.168.10.101 - 192.168.10.250

pix configuration with command prompt

Pix CONFIGURATION

1) Enable

2) Hostname

3) Interface e0 auto I

4) nterface e1 100full

5) Nameif e0 outside security 0

6) Nameif e1 inside security 100

7) ip address inside 192.168.10.1 255.255.255.0

8) ip address outside 192.168.1.101 255.255.255.0

9) nat (inside) 1 0.0.0.0 0.0.0.0 0 0

10) global(outside) 1 192.168.1.111-192.168.1.150 netmask 255.255.255.0

11) route outside 0.0.0.0 0.0.0.0 192.168.1.100 1

12)

when I insert pix into live network internet not working on any computer

I ping to my computer to inside ip address ,it is pinging

pl modify any changes and send to me

MY Email-ID [email protected]

contact nubmer 9860051380

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
husycisco Mon, 01/21/2008 - 07:53

Hi dinesh

When a computer is directly connected to BSNL and has a gateway of 192.168.1.100, can it connect to internet?

Also make sure interfaces are up

int eth0

no shu

int eth1

no shu

Can you please post the running-config of both devices? (type sh run to see config in user mode)

Regards

Actions

This Discussion