01-20-2008 11:31 PM - edited 03-05-2019 08:35 PM
Hi Everyone,
I have a nagging issue with one of my routers which I used for my CCNA exams. Whenever I log into it while waiting at the exec prompt the following error is notified:
%Error opening tftp://255.255.255.255/network-confg (Timed out)
%Error opening tftp://255.255.255.255/cisconet.cfg (Timed out)co
%Error opening tftp://255.255.255.255/lagos.inetlynx-confg (Timed out)
%Error opening tftp://255.255.255.255/lagos.in.cfg (Timed out)
This started when I mistakenly erased the content of the flash but since I resolved the problem with the flash, that is, reinstalled the IOS I've been getting this nagging error. Any assistance reandered will be appreaciated.
Concerned Admin
Solved! Go to Solution.
01-20-2008 11:56 PM
USe the command " No service config" under the global configuration mode to avoid these error messages
HTH
Narayan
01-20-2008 11:56 PM
USe the command " No service config" under the global configuration mode to avoid these error messages
HTH
Narayan
01-22-2008 05:21 PM
Thanks very much for tha assistance
01-21-2008 12:03 AM
Hi,
The router, viewing these messages, take the configuration file in a server tftp not accesible; or the file is not accessible for read.
You've probably specified this using the command: boot host.
View, for more information, boot config e boot host.
http://www.cisco.com/en/US/docs/ios/12_0/configfun/command/reference/frcfgfil.html#wp1017539
I hope this helps.
Best regards.
Massimiliano.
01-22-2008 05:22 PM
Thank you for your reference it didn't solve the problem but hey it taught me something new.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide