01-21-2008 02:35 AM - edited 03-15-2019 08:19 AM
Hi all, I've already posted this on the UC Apps page but got knowhere..:
Customer has the following Setup:
Nortel Option 11 PBX --- E1 --- Cisco ISR --- WAN --- 2851 (H323) In UK -
-- CallManager --- Mobility Manager --- PSTN --- Deskphone/Mobile
Calls over the WAN to a Mobility Manager user in the UK are failing. Call will ring on both deskphone and Mobile, if the user
picks up the call on the Mobile they get beeps and call disconnects.
Previously thought this was a codec issue but I configured the current VoIP dial-peer on the VG in the UK to use only G711 and also set the
Regions between Remote site voice gateway and UK Users to use G711 also. Same behaviour as before. Anyone experienced this issue before?
01-21-2008 03:04 PM
Hi..
What does the debug isdn q931 show on the H323 gateway as the disc cause?
Cheers,
Tim
01-21-2008 10:42 PM
Morning Tim, I'm seeing Normal Call Clearing. Which normally indicates that everything is ok on the network.
01-22-2008 12:34 AM
Hi..
Are you sending the disconnect? Or receiving it from the PSTN?
Cheers,
Tim.
02-26-2008 10:58 AM
Also, are you using the same Gateway to go out to the Cell phone as you are to take the call from the Nortel?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: