cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
590
Views
0
Helpful
3
Replies

SIP SRST 2821

todd.embree
Level 1
Level 1

What IOS version should I be running to support SIP SRST on my 2821? Currently running Version 12.3(11)T10. Hard to find this info. Of course im a noob in voice but thats why im here. Thanks Ahead.

Todd

3 Replies 3

Rob Huffman
Hall of Fame
Hall of Fame

Hi Todd,

Here are the notes for SIP SRST 4.1 and 4.0;

Prerequisites for Cisco Unified SIP SRST 4.1

Cisco IOS Release 12.4(15)T or a later release.

Cisco Unified IP Phones 7911G, 7941G, 7941GE, 7961G, 7961GE, 7970G, and 7971GE require firmware load 8.2(1) or a later version.

http://www.cisco.com/en/US/products/sw/voicesw/ps2169/products_configuration_guide_chapter09186a0080874e61.html#wp1020952

Cisco Unified SIP SRST V4.0, Cisco IOS Release 12.4(4)XC

With Cisco Unified SIP SRST 4.0, a SIP redirect server is not necessary. Instead, a back-to-back user agent (B2BUA) server routes the call as desired. A B2BUA is a separate call agent that has more features than a redirect server, which can accept and forward calls only. With a B2BUA you can also configure call blocking and call forwarding. In call forwarding, the B2BUA forwards calls on behalf of the phone, while maintaining a presence as call middleman in the call path.

http://www.cisco.com/en/US/products/sw/voicesw/ps2169/products_configuration_guide_chapter09186a0080874e6d.html

Hope this helps!

Rob

Thanks Rob!!

Hi Todd,

You are most welcome! Glad to help a little bit.

Take care,

Rob

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: