7600 NDE

Unanswered Question

Hi


I have configured NDE and the sh mls nde shows data being exported. However only traffic being sourced or destined for the PE is being generated. I have deployed sniffers on various locations between the PE and the netflow collector but only the PE traffic is logged. What am I missing?


config

ip flow-export [ip address] 5022 vrf PE-MGMT

ip flow-export version 5

mls flow ip interface-full

mls nde sender version 5

ip flow-export source loop1




Thanks in advance

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Joe Clarke Tue, 01/22/2008 - 13:07
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

This will only enable Netflow for hardware switched traffic. You may also need to enable Netflow on the MSFC for software switched packets. To do that, you need to enable "ip route-cache flow" on each desired interface. See http://www.cisco.com/en/US/docs/routers/7600/ios/12.2SXF/configuration/guide/netflow.html for more details.

Joe Clarke Thu, 01/24/2008 - 07:39
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

It would help to see the full show ver and show run to see if there are any other configuration or bug issues.

Actions

This Discussion