01-21-2008 10:36 AM - edited 03-15-2019 08:20 AM
Currently have running a new 2811 with CME. It has a NME-16es-1g-p card in it and runs great with my 7911G and 7941G phones. I am currently trying to evaluate a rugged 7960G on it but it will not power on. I know that the 7940G uses Cisco prestandard PoE but from all the research online, it looks like this card should handle both 802.3af and cisco prestandard PoE.
01-21-2008 10:55 AM
If you do a sh power inline, are the ports enable d to have POE?
Good guide:
I did find this bit of info.
NME-16ES-1G-P-Standard single-wide Cisco EtherSwitch service module with 16 10/100-Mbps ports with Power over Ethernet (PoE), and 1 10/100/1000 Gigabit Ethernet port.
Note The 10/100/1000 Gigabit Ethernet port on the 16-port Cisco EtherSwitch service module does not support PoE.
01-21-2008 11:22 AM
Power is on and enabled. I do know that the gig port does not have POE.
01-23-2008 10:57 AM
Im having exactly the SAME issue with 'NME-XD-24ES-1S-P' and 'NME-XD-48ES-2S-P' on C3825. All phones that use Cisco prestandard (7940 and 7960) dont get power.
Phones that use IEEE 802.3af POE work fine.
Have you discovered what the problem is?
thanks a lot,
Met
01-23-2008 11:11 AM
Not yet. I am waiting for my contract # so I can get ahold of TAC.
01-23-2008 12:46 PM
CSCsi70300 Bug Details
NME Etherswitch Service Module Not Detecting Pre-Standard Devices
Symptom:
Pre-Standard POE devices are not powering up, link is down/down.
Conditions:
PreStd POE device must be connected to Etherswitch Service Module (ex. NME-16ES-1G-P) running 12.2(35)SE2.
Workaround:
Downgrade IOS to 12.2(25)SEE3
Further Problem Description:
Althought the NME runs 3750 IOS, the problem is not seen on a 3750 switch.
The IEEE 802.3af devices function fine (ex. 7961, 7941), only Pre-Std are affected
01-23-2008 02:21 PM
Thanks for the info. Any idea if 12.2(25)SEE3 supports 802.3af as well?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: