CUAE (Metreos) Configuring it to set QoS on its Packets

Unanswered Question
Jan 21st, 2008

Hi I have a customer who has metreos or Cisco UAS/UME, version 2.3 and it appears from the packet captures that is does not mark and packets for ToS or DSCP. Is this configurable from within the Metreos at either an application, script or OS level. If not the customer will have to configure the marking on the switch but I would just like it confirming the metreos cannot be configured to do it.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion