Anyone has ideas on how to accomplish this?
External IP: 18.104.22.168/28
Internal IP: 192.168.1.1/24
DMZ IP: 192.168.2.1/24
I have a Cisco 2621 running IOS with IPSec capable code.
Very simple design, External, Internal and DMZ
Hosts behind the "Internal" get to the Internet via port address
translation on the External interace. The DMZ interface
is connected for extranet partners coming over the FRAME-relay,
MPLS, PPP, etc... connections.
There are twenty site-2-site VPNs on this router from both
the External and DMZ interfaces. I use the loopback0 as the
VPN terminating endpoint. Everything is woring fine.
Now customer wants to replace this router with a Cisco ASA
5520 appliance. The requirement is to keep ALL existing
VPNs the same. Since creating loopback is not possible on
the ASA, how would one go about making this configuration
work with ASA? One other things, NO CHANGE CAN BE MADE ON
THE OTHER 20 REMOTE VPN PEERS.