copying start to TFTP-3122 bytes, sh run 4487 bytes

Answered Question
Jan 22nd, 2008
User Badges:

Hi,

Copying start to TFTP server shows 3122 bytes copied over, however a sh run provides an output of 4487 bytes. Is the discrepancy between the above memory volumes normal?

Correct Answer by Richard Burts about 9 years 4 months ago

Said


I have checked on a couple of routers and they copy the same length when copying start or copying running. It looks to me as if changes were made in running-config that are not saved to startup-config.


HTH


Rick

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Richard Burts Tue, 01/22/2008 - 10:39
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Said


I have checked on a couple of routers and they copy the same length when copying start or copying running. It looks to me as if changes were made in running-config that are not saved to startup-config.


HTH


Rick

saidfrh Tue, 01/22/2008 - 11:12
User Badges:

Thanks Rick. I "copied TFTP to start", then a "sh run" showed same discrepancy in memory volume. We are using a 2821 router with full firewall features. I wonder if some attributes of the firewall do not copy to TFTP.


Said

a.cruea1980 Wed, 01/23/2008 - 07:12
User Badges:
  • Bronze, 100 points or more

Do you happen to have remarks in your configuration?


Have you done a simple "wr" recently to make sure run and start are the exact copy?

saidfrh Wed, 01/23/2008 - 07:42
User Badges:

Yes, I have description of the circuit.


Thanks.

Actions

This Discussion