I found this configuration on on customer:
!
interface GigabitEthernet1
ip address 192.168.1.254 255.255.255.0
!
interface GigabitEthernet2
ip address 192.168.2.254 255.255.255.0
!
interface GigabitEthernet7
ip address 10.40.61.1 255.255.255.0
!
interface GigabitEthernet8
ip address 192.168.8.254 255.255.255.0
!
router ospf 1
network 10.40.61.0 0.0.0.255 area 1
network 192.168.1.0 0.0.0.255 area 1
network 192.168.2.0 0.0.0.255 area 1
network 192.168.8.0 0.0.0.255 area 1
!
ip route 0.0.0.0 0.0.0.0 10.40.61.8
!
!
This customer put and seconf ISP.
how can route the traffic to the both ISP simultanously?. If not how can send some trafic to one isp and the other traffic to the second isp?.
what happened if i remove the ip route 0.0.0.0 0.0.0.0 10.40.61.8 ?.
!
Thanks.