CCME: Caller ID shows "911" on Unknown number calls from PSTN

Unanswered Question

Hello,


System is 2821 with 1 VIC2-2FXO for PSTN access running CCME 4.2.


PSTN Caller ID works fine when it is sent from the CO, whether it is shown or restricted "Private Number". But in some cases, "911" shows up on the screen. A test phone shows "Unknown number" instead of "Private Number". What would be the cause and how can I debug this in the console?


Thanks.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Paolo Bevilacqua Wed, 01/23/2008 - 06:47
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

That would be "debug vpm signal" with "term mon".


But when you don't get a number, it means the caller-id reception has failed, and display it's picking some DP tag or destianion-pattern number that you have in config.

If you send the DP config, some workaround can be suggested.


Hope this helps, please rate post if it does!

Actions

This Discussion