Cross stack etherchannel

Unanswered Question
Jan 23rd, 2008
User Badges:

Dear all,


I am in the process of planning the configuration of a new Etherchannel from our 3750-24-TS switches to our 4507's.


We currently have 2 x server racks each with 2 x 3750's in them. Each of the 3750's is currently connected back to a 4507 via 2 x SFP (RJ45) modules (there is a 2Gb etherchannel configured between each 3750 and their respective 4507).


What I plan to do is to stack each pair of 3750's and then create 1 x 4Gb EC back to their respetive 4507.


I have upgraded the IOS on all 3750's to the same revision (12.2(25)SED1) so that I can use the cross stack etherchannel feature.


Could somebody clarify that a LACP EC is the way to go in order to have a single 4Gb EC ? (I have tried using PAgP but the 3750 stack states that the interfaces need to be on the same switch when configuring the PAgP EC).


I have attached the proposed config to this call for referecne.


Thanks in advance.



Attachment: 
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Edison Ortiz Wed, 01/23/2008 - 06:49
User Badges:
  • Super Bronze, 10000 points or more
  • Hall of Fame,

    Founding Member

Yes, LACP will work.


Keep in mind, you need to have the same configuration on the physical interfaces as the port-channel interface.


HTH and good luck.


__


Edison.

Actions

This Discussion