cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
381
Views
0
Helpful
2
Replies

1121 AP with EAP

drgebhardt
Level 1
Level 1

Is there a means to configure autonomous 1121s to use EAP and use Microsoft Active Directory as the authenticator? Or will I need a RADIUS server?

2 Replies 2

manjesin
Level 1
Level 1

You can use Microsoft IAS server .. i don'think active directory have an option to enable IEEE 802.1x on it.. .. it contain the database of users .. which can be mapped with some radius server ..

Here is link for you reference with IAS server

http://technet.microsoft.com/en-us/library/bb726967.aspx

If you open the above link and download peap.doc file .... you find information

802.1X-capable RADIUS server----> Available in Internet Authentication Service (IAS) in the Windows Server 2003 and Windows 2000 Server families which support only PEAP-MS-CHAP v2 and EAP-TLS.

Here is link with ACS server configuration :-

http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_example09186a00801bd035.shtml

I believe these answers ur question ..

Pls rate this if you found this useful

Thanks

Thanks for the links. From the server side (IAS) I believe that I have everything setup correctly. My follow-on questions is what does the configuration on the AP look like when configured for PEAP-MS-CHAP-V2 or EAP-TLS? An example would of great help.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: