01-23-2008 11:38 AM - edited 03-05-2019 08:40 PM
Hi,
was curious what a config would look like if I were to setup my core switch to have a redundant wan circuit. Example I have (2) managed AT&T routers that are connected to our MPLS. If for some reason the circuits are out how can I have it roll over to my DSL circuit as an emergency backup ? To have connectivity? What would the config look like for something like that?
01-23-2008 12:13 PM
You would put a static route in the cores with a higher administrative distance than your IGP (pointing to DSL). For example-
ip route 192.168.5.0 0.0.0.255 10.10.10.50 220
HTH and please rate.
01-23-2008 03:39 PM
you can also setup another default route
0.0.0.0 0.0.0.0
If you have a PIX, you could build an IPSec VPN tunnel to have a redundant connection.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide