Rail Kit for MCS7835 H2 ???

Unanswered Question
Jan 23rd, 2008
User Badges:


I brought down a new call manager to a customer yesterday and it had no rack mount kit included. Cisco is being no help, and I cant even order the kit separately!!

Does anyone know what corresponding HP server (2U) it might be so I can get it from them?

I know its an unusual request, I apologize, but Im out of options.



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Frederick Nielsen Thu, 01/24/2008 - 08:12
User Badges:
  • Bronze, 100 points or more

The 7835-H2 should be an HP DL380-G5, and so far every one I've seen comes with a rail kit. Good luck!

Rob Huffman Thu, 01/24/2008 - 08:34
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Bob,

Just a note to add to the good info from Frederick. The Rail Kit part #'s are listed in this doc;


Hope this helps!


This should have shipped with the Kit. We just received 5 new 7845's and they were all included :(

mx Thu, 01/24/2008 - 11:45
User Badges:

Thanks guys, you are life savers!

Im sure this one came with it too, but we moved offices between opening it and configuring it, so I think our trash guys got a little excessive. Its better they kept the server though ;-)


mx Thu, 01/24/2008 - 11:48
User Badges:

Rob, Ironically, I dont see the rack mount kit part number for the G5 on this doc. would it be the same as another model?

Thanks again!


Frederick Nielsen Thu, 01/24/2008 - 11:58
User Badges:
  • Bronze, 100 points or more

I would bounce this through HP.. give them the model (418044-001) identified in the link Rob provided.


This Discussion