Question over support for OC12 card in 7604/SUP720/SIP400

Unanswered Question
Jan 24th, 2008

Can someone help me check that the following hardware will run on my 7604 with sup720 and sip 400.

I need to run s72033-ipservices_wan-mz.122-18.SXF2

will the following SPA card work ?

SPA-1XOC12-POS

I am concerned that although I think the IOS release is high enough I can't confirm that the supervisor firmware is compatable

many thanks for any pointers in the right direction,

Will

incase i've missed anything obvious, here's a sh hard

Cisco Internetwork Operating System Software

IOS (tm) s72033_rp Software (s72033_rp-IPSERVICES_WAN-M), Version 12.2(18)SXF2,

RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2006 by cisco Systems, Inc.

Compiled Thu 19-Jan-06 05:17 by dchih

Image text-base: 0x40101040, data-base: 0x42A58000

ROM: System Bootstrap, Version 12.2(17r)S4, RELEASE SOFTWARE (fc1)

BOOTLDR: s72033_rp Software (s72033_rp-IPSERVICES_WAN-M), Version 12.2(18)SXF2,

RELEASE SOFTWARE (fc1)

cpe-u-01-gsn-usdal01n uptime is 18 weeks, 4 days, 10 hours, 37 minutes

Time since cpe-u-01-gsn-usdal01n switched to active is 18 weeks, 4 days, 10 hour

s, 36 minutes

System returned to ROM by reload (SP by reload)

System restarted at 22:51:47 UTC Sat Sep 15 2007

System image file is "bootdisk:s72033-ipservices_wan-mz.122-18.SXF2.bin"

cisco CISCO7604 (R7000) processor (revision 2.0) with 983008K/65536K bytes of me

mory.

Processor board ID FOX1102023M

SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache

Last reset from s/w reset

SuperLAT software (copyright 1990 by Meridian Technology Corp).

X.25 software, Version 3.0.0.

Bridging software.

TN3270 Emulation software.

1 SIP-400 controller (4 GigabitEthernet).

1 Virtual Ethernet/IEEE 802.3 interface

6 Gigabit Ethernet/IEEE 802.3 interfaces

1917K bytes of non-volatile configuration memory.

8192K bytes of packet buffer memory.

65536K bytes of Flash internal SIMM (Sector size 512K).

Configuration register is 0x2102

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion