cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
389
Views
0
Helpful
3
Replies

Easy VPN in Mesh setup

ismartnets
Level 1
Level 1

hi I have 4 Easy VPN sites which are terminating on ASA fire wall and we need access from all VPN sites to each other currently all are Easy VPN sites is it possible in Easy VPN ?/

3 Replies 3

ajagadee
Cisco Employee
Cisco Employee

Yes, this should be possible using

The feature you are trying to enable, permit traffic to enter and exit the same interface, to permit two or more spokes (VPN clients or hardware clients) comunicate to each other, is only for 7.x version.

Please refer the below URL for details:

http://www.cisco.com/en/US/partner/products/hw/vpndevc/ps2030/products_configuration_example09186a00804675ac.shtml

Regards,

Arul

** Please rate all helpful posts **

command:

same-security-traffic permit intra-interface

Dear Sir,

Thank you ... also provide us an example with Router, we want to integrate site using Router acting as EzVPN in mesh setup pl find below is the show version

Cisco IOS Software

, 1841 Software (C1841-ADVIPSERVICESK9-M), Version 12.4(9)T5, RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2007 by Cisco Systems, Inc.

Compiled Thu 16-Aug-07 14:30 by prod_rel_team

ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)

MOALAJAHAUH uptime is 1 hour, 5 minutes

System returned to ROM by power-on

System image file is "flash:c1841-advipservicesk9-mz.124-9.T5.bin"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

Cisco 1841 (revision 7.0) with 235520K/26624K bytes of memory.

Processor board ID FCZ112310L9

2 FastEthernet interfaces

1 ATM interface

1 Virtual Private Network (VPN) Module

DRAM configuration is 64 bits wide with parity disabled.

191K bytes of NVRAM.

62720K bytes of ATA CompactFlash (Read/Write)

Configuration register is 0x2102

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: