Unanswered Question
Jan 24th, 2008
User Badges:

Hi all

I configured PAT rule so that the vpn traffic from a remote client is forwarded through cisco 2821 router to vpn box (Nortel contivity) the problem is that when IKE traffic received the router forwarded to the client but somehow missing I mean that the vpn box waits to ISAKMP proposal to come but nothing arrives, and the connection is terminated. Here are the rules

ip nat inside source static udp vpn_box_address 500 interface wan_interface 500 ( this is for IKE)

ip nat inside source static esp vpn_box_address interface wan_interface

I have configured access list to allow the traffic

Any idea?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
smitty6504 Thu, 01/24/2008 - 06:08
User Badges:

Add GRE and AHP for your PAT and that should take care of it.

mhcnetadmin Sun, 01/27/2008 - 00:39
User Badges:

you mean to the access list, because in PAT rules all I can add is esp,tcp,udp nothing else !!

mhcnetadmin Mon, 01/28/2008 - 00:02
User Badges:

the problem is solved the routing in the vpn box was wrong, thanks


This Discussion