Eol or EoS for

Unanswered Question
Jan 24th, 2008
User Badges:

Hi All


I have a Cat 4503 running CatOS. I have just checked the website and know that supervisor card WS-X4013 is now EoL for Cat 4000.


Is it EoL also for Cat 4503?


1 1 2 1000BaseX Supervisor WS-X4013 no ok

2 2 48 10/100/1000 Ethernet WS-X4448-GB-RJ45 no ok

3 3 48 10/100/1000 Ethernet WS-X4448-GB-RJ45 no ok

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Martin Parry Thu, 01/24/2008 - 07:28
User Badges:
  • Silver, 250 points or more

But you stated in your original post that your enquiry regarded the WS-X4013 SUP 2. These went EOS May 2005


Regards


Martin



qwertys21 Thu, 01/24/2008 - 07:35
User Badges:

Thanks Martin


It shows on my show mod


1 1 2 1000BaseX Supervisor WS-X4013


Is this the same as WS-X4013 SUP 2. This is really confusing as I need to be sure I am not saying a device is EoL when it is not.


So what I have is a Cat 4503 with


Mod Slot Ports Module-Type Model Sub Status

--- ---- ----- ------------------------- ------------------- --- --------

1 1 2 1000BaseX Supervisor WS-X4013 no ok

2 2 48 10/100/1000 Ethernet WS-X4448-GB-RJ45 no ok

3 3 48 10/100/1000 Ethernet WS-X4448-GB-RJ45 no ok


Is the


1 1 2 1000BaseX Supervisor WS-X4013 end of life?


Thank for your help.

ankbhasi Thu, 01/24/2008 - 07:40
User Badges:
  • Cisco Employee,

Hi Friend,


WS-X4013 is SUP 2 and WS-X4013+ is SUP2 Plus.


WS-X4013 only supports CATOS and is now EOL but SUP2+ supports IOS and is still supported on 4500 chassis.


What you have is SUP2 which is EOL.


HTH


Ankur


*Pls rate all helpfull post

FWIW, this is what a sh module looks like for a Sup II+ 4503

Chassis Type : WS-C4503


Power consumed by backplane : 0 Watts


Mod Ports Card Type Model Serial No.

---+-----+--------------------------------------+------------------+-----------

1 2 Supervisor II+ 1000BaseX (GBIC) WS-X4013+ JAE00000000

2 48 10/100/1000BaseT (RJ45)V, Cisco/IEEE WS-X4548-GB-RJ45V JAE00000000

3 48 10/100/1000BaseT (RJ45)V, Cisco/IEEE WS-X4548-GB-RJ45V JAE00000000

qwertys21 Thu, 01/24/2008 - 09:14
User Badges:

This is what I get on the show module on another Cat 4503 running IOS. Is this Sup or Sup II and is this EoL? It does not explicitly say Supervisor II+ like yours says.


Thanks


Mod Ports Card Type Model Serial No.

---+-----+--------------------------------------+------------------+-----------

1 2 1000BaseX (GBIC) Supervisor(active) WS-X4013+ JAE07350945

2 48 10/100/1000BaseTX (RJ45) WS-X4448-GB-RJ45 JAB080908KP

Martin Parry Thu, 01/24/2008 - 09:19
User Badges:
  • Silver, 250 points or more

But it does say WS-X4013+ which is Sup2+. The SUP2 only runs CAT OS, wo the fact that you are running IOS is another indication you have a SUP2+ in that chassis.


Martin

qwertys21 Thu, 01/24/2008 - 09:36
User Badges:

Thank you. Now I can be sure of what I am saying. Thank ou very much

Actions

This Discussion