cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
675
Views
0
Helpful
8
Replies

Echo issues

cris_jimenez
Level 2
Level 2

Hi,

we have echo issues with incoming and outgoing calls.

we are running CCM 5 and we have a 2851 GW

could you please point me to some troubleshooting steps

thank you

1 Accepted Solution

Accepted Solutions

paolo bevilacqua
Hall of Fame
Hall of Fame

Which kind of lines do you have and which exact IOS do you hae ?

View solution in original post

8 Replies 8

paolo bevilacqua
Hall of Fame
Hall of Fame

Which kind of lines do you have and which exact IOS do you hae ?

IOS Version 12.4(3g), RELEASE SOFTWARE (fc2)

I have a PRI

jcraven
Level 1
Level 1

It doesn't seem to make sense at first, but echo=DSPWare issue. And the DSPWare issue is resolved by the right IOS. as others are stating, check out that link to the other thread. and, if someone wnated to rate my original post that refers to the specific bug ID and my experience, it would not hurt my feelings. he he.

cheers,

Jerry

I did rate it Jerry. Thank you for sharing your findings!

flopez
Level 1
Level 1

there are also QOS settings you can change on the router and switches that might help. But you will have to contact Cisco TAC and talk to the QOS team. If you are using Auto-QOS this is likely to happen.

I just upgraded the IOS of my GW, I will monitor for the next few days and hopefully that will fix my issue if not I will open a TAC case to troubleshoot QoS

using ecan modules?

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: