Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
380
Views
0
Helpful
3
Replies

Anyway to shorten the call setup time for CallManager to PSTN?

teru-lei
Level 1
Level 1

‎01-24-2008 05:11 PM - edited ‎03-15-2019 08:24 AM

Hi All,

Anyway to shorten the call setup time for CallManager to PSTN through voice gateway and CCME to PSTN? Seems the call setup time by default to PSTN is longer then using traditional PBX.

Best Regards,

Teru Lei

Labels:
0 Helpful
3 Replies 3

sadbulali
Level 4
Level 4

‎01-30-2008 01:24 PM

you can shorten the interdigit timer value by performing these steps in Cisco CallManager:

Select Service > Service Parameters, and select server.

Find the TimerT302_msec* parameter, enter a value of 6000 and click Update. This sets the interdigit timer to six seconds.

Have the users test the phones and adjust as necessary.

0 Helpful

jbarcena
Level 9
Level 9

‎01-30-2008 02:29 PM

Teru, you can also use # key to route the call after dialing the digits, that will route the call immediately.

HTH

//Jorge

0 Helpful

a.gooding
Level 5
Level 5
In response to jbarcena

‎01-31-2008 08:20 AM

or you can revise your dial plan and see what is overlapping to cause the system to wait for the completed digits.

0 Helpful
Customers Also Viewed These Support Documents