NM-HDA Issues with CCM 4.1(3)

Unanswered Question

I am running into issues with a 2811 MGCP gateway running a NM-HDA module, I am unable to get the FXS ports (4 onboard) to register. The ports are configured as well as the dial-peers with the "service mgcpapp" command but the devices still don't register. Any help would be appreciated. IOS is 12.4(18).

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)


This Discussion