NAT to inside, changing source

spacemky · ‎01-25-2008

Hi NetPros,

I'm attempting to configure NAT in both directions, and having a bit of difficulty.

My inside host, 192.168.1.2 will *only* permit traffic from host 192.168.1.1.

My outside IP is 169.254.1.210, and has an ethernet interface on the (inside) 192.168.1.0/24 network.

I need outside (Internet) users to hit 169.254.1.210, and have my inside host 192.168.2.1 see the traffic as coming from src 192.168.1.1. Is this possible? I've tried configuring outside and inside NAT to the best of my CCNA ability!

Thanks!

spacemky · ‎01-25-2008

I typoed that last line; It should say:

I need outside (Internet) users to hit 169.254.1.210, and have my inside host 192.168.1.2 see the traffic as coming from src 192.168.1.1.

I am, of course, pretending that 169.254.1.210 is a routeable Internet IP.