01-25-2008 10:23 AM - edited 03-03-2019 08:25 PM
I had to setup and router with both protocols, im receiving the provider with the lan interface in area 1. I want change the configuration on my router to continous using ospf and additionaly i want setup other protocol like eigrp for other new provider.
how it is possible?
thanks.
01-25-2008 11:38 AM
router ospf 1
network [interface connected to ISP1] area 1
router eigrp 1
network [interface connected to ISP2]
no auto-summary
HTH,
__
Edison.
01-28-2008 01:35 PM
Hi Edinson, my question is the network entry in the router eigrp 1 command is only the interface conected to the isp2?, can I select specific interfaces (or subnets) to participate in the dinamic routing (the entries in the router eigrp 1 command).
For example if I want the subnet 192.168.1.2 forward o route all the traffic to the isp2 , can i put this network in the network command?.
thank for your help.
01-28-2008 01:50 PM
Yes, you can select specific interfaces to participate in the EIGRP process.
If you want only 192.168.1.2, the commands will be as follow
router eigrp 1
network 192.168.1.2 0.0.0.0
no auto-summary
__
Edison.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: