CatOS command for trunking

Answered Question
Jan 25th, 2008
User Badges:

What command is it to display what vlans are permitted over a trunk port, tagged, etc. And what command is it to set a vlan over a trunk port?


I can do this in IOS but need to know in CatOS.


I need to allow vlan 100,200 on this port.

Correct Answer by ankbhasi about 9 years 5 months ago

Hi Sparky,


You can use command "show trunk" to get the status of all active trunking ports. To get the details of all allowed vlans on trunk port issue a command "sh trunk detail"


http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/catos/7.x/command/reference/sh_ti_tr.html#wp1028168


To add the vlans on existing trunk port use this command "set trunk


http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/catos/7.x/command/reference/setsy_tr.html#wp1166564


HTH


Ankur


*Pls rate all helpfull post

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
ankbhasi Fri, 01/25/2008 - 11:12
User Badges:
  • Cisco Employee,

Hi Sparky,


You can use command "show trunk" to get the status of all active trunking ports. To get the details of all allowed vlans on trunk port issue a command "sh trunk detail"


http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/catos/7.x/command/reference/sh_ti_tr.html#wp1028168


To add the vlans on existing trunk port use this command "set trunk


http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/catos/7.x/command/reference/setsy_tr.html#wp1166564


HTH


Ankur


*Pls rate all helpfull post

dballard99 Fri, 01/25/2008 - 12:27
User Badges:

show vlan trunk will display vlan and ports allowed.


set trunk


example: set trunk 5/17 on dot1q


dballard99 Fri, 01/25/2008 - 12:30
User Badges:

show vlan trunk will display vlan and ports allowed.


set trunk


example: set trunk 5/17 on dot1q


or


set trunk



Actions

This Discussion