Wireless LAN controller 4402

Answered Question
Jan 26th, 2008
User Badges:

Is it possible to config only 1 GB connection to 4402 LAN controller. Or must I use both Gb connectors ?

Because I have only 1 Gb port free on my switch.

Correct Answer by ankbhasi about 9 years 4 months ago

Hi Rene,


You can very well use only one gig port to connect to the switch. 2 ports can be used if you want to have por tchannel on switch and you want your controller to work with LAG.


But you can simply connect 1 port on switch to the controller and while configuring manamenet and ap-manager interface bind them to one physical port whichever you are using.


HTH


Ankur


*Pls rate all helpfull post

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
Correct Answer
ankbhasi Sat, 01/26/2008 - 11:11
User Badges:
  • Cisco Employee,

Hi Rene,


You can very well use only one gig port to connect to the switch. 2 ports can be used if you want to have por tchannel on switch and you want your controller to work with LAG.


But you can simply connect 1 port on switch to the controller and while configuring manamenet and ap-manager interface bind them to one physical port whichever you are using.


HTH


Ankur


*Pls rate all helpfull post

Actions

This Discussion